On November 13, 2025, a significant joint emergency response drill was conducted by the Emergency Management Department Sichuan Fire Research Institute and Suntex Composite Industrial Co.,Ltd. focusing on electric vehicle fire emergencies.
The Sichuan Dujiangyan Fire Brigade was on site, demonstrating readiness and precision in deploying the innovative Suntex Fire Control Blanket.
Key Drill Observations & Data:
Controlled Venting: Approximately 10 minutes after covering the burning vehicle, the blanket began to vent gases from within. Our specialized material has a tested permeability rate of 2.3-2.7 cm³/(cm²·s), a critical feature that strategically reduces the risk of post-coverage explosion by managing smoke and flammable gases.
Extended Durability Test: As per the test protocol, the blanket remained in place for 60 minutes. Upon removal, while the damaged vehicle experienced a flare-up, the battery’s thermal runaway had significantly slowed, demonstrating the blanket’s ability to mitigate the core reaction.
Proven Performance: The drill conclusively proved the Suntex blanket’s capabilities.
Drill Verdict: Proven Effectiveness
Fire Containment: Effectively blocks flame spread for at least 60 minutes.
Thermal Protection: Significantly reduces ambient temperature, safeguarding adjacent equipment and personnel.
Strategic Venting: Offers a crucial smoke ventilation function, venting flammable gases from battery thermal runaway after ~10 minutes, drastically reducing the risk of gas accumulation and explosion.
Durability & Reusability: Maintains structural integrity and a degree of flexibility even after 60 minutes of direct high-temperature exposure, allowing for multiple reuses.
This drill underscores the vital dual advantage of the Suntex Fire Control Blanket: superior fire control coupled with managed smoke extraction. It’s a robust solution enhancing safety for first responders and the public facing the challenges of EV fires.
#FireSafety #Innovation #ElectricVehicles #EVSafety #ThermalRunaway #Firefighting #EmergencyResponse #Suntex #IndustrialSafety
Contact Details
Suntex Composite Industrial Co., Ltd.
Contact Person: Mr. Jason Hu
Tel: +86 132 0712 7986
Send your inquiry directly to us
New Welding Blanket Developed for Korea’s Latest KFI Standard Requirements Suntex launches upgraded grey silicone-coated fiberglass welding blankets fully compliant with Korea’s latest KFI fire safety standards for hot work. Made of premium grey silicone coated fiberglass rolls, our blankets deliver reliable protection against welding sparks, molten slag, and high heat for welding, cutting, and […]
In the high-stakes environment of Japanese automotive manufacturing and precision machining, “good enough” is never enough. When a single stray spark can lead to costly downtime or compromise the integrity of automated assembly lines, the quality of your protective gear is a direct reflection of your operational safety standards. For facilities prioritizing fire prevention and […]
Welding sparks trigger most construction site fires. Even standardized operating procedures carry hidden risks if low-performance flame-retardant fabrics are used. Recent frequent construction fires sound alarms for hot work safety. Most welding-caused blazes stem from inadequate high-temperature slag shielding and substandard fire-resistant materials, rather than improper operation alone. Welding arcs hit over 6,000°C, with flying […]
The Hidden Cost of Inferior Thermal Insulation Lithium battery thermal runaway and industrial high-temperature insulation failures frequently trigger factory fires, unplanned shutdowns and massive economic losses. Most of these accidents stem from low-performance standard insulation materials, rather than major equipment faults. Substandard fiberglass cloth fails under high heat, accelerating fire spread and causing costly industrial […]
English
Arabic
Dutch
French
German
Italian
Polish
Portuguese
Russian
Spanish